6440A REV F Norge Washer Parts List

Search the entire 6440A REV F by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?

M series new style coil kit (dryer secondary valve coil)

This gas dryer ignition coil set comes with two ignition coils: one three-terminal boost/hold coil, and one two-terminal secondary coil. If there is no heat or your drying time is getting longer, the coils may be bad and will need to be replaced. Once the coils go bad they do not hold the gas valve open properly. Usually only one of them burns out but you should replace them as a set. Both must be operational for the gas valve to open. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:: EAP334310

Availability:: In Stock

Price:: $35.48

Temperature sensor (probe)

The temperature sensor, also known as an oven probe, detects the temperature within the oven cavity. This temperature sensor is a genuine OEM part. If your oven is too hot, not heating evenly, has little to no heat when baking, or is flashing F3/F4 error messages on your control board, you may need to replace the temperature sensor. Please make sure to disconnect the power to your range before starting your repair.

Easy Part #:: EAP820208

Availability:: In Stock

Price:: $57.79

Oven bake igniter (range oven burner igniter)

Easy Part #:: EAP2364063

Availability:: In Stock

Price:: $161.91

Refrigerator shelf (spill safe) - white (spill-safe glass shelf with frame)

Easy Part #:: EAP2581463

Availability:: On Order

Price:: $160.75

Heating element assembly (pan heating element assembly)

This E-line assembly comes with a felt strip and insulators already attached. Heating elements are strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is used to dry the clothes in your dryer. If your dryer has little or no heat you may need to replace the heating element. This is a genuine OEM part. Please remember to shut off the power to the dryer before starting the repair.

Easy Part #:: EAP418120

Availability:: In Stock

Price:: $195.31

Door shelf retainer bar end cap - right side

This bar end cap is sold individually.

Easy Part #:: EAP429668

Availability:: In Stock

Price:: $11.57

Refrigerator door bin (bin-door)

This door bin is for refrigerators. Door bin attaches to the inside of the refrigerator door and typically holds jars and bottles. Follow the instructions in the owner's manual for installing this part. Sold individually.

Easy Part #:: EAP429767

Availability:: In Stock

Price:: $108.04

Temperature sensor (probe)

This temperature sensor detects the temperature within the oven cavity.

Easy Part #:: EAP1528542

Availability:: In Stock

Price:: $59.32

Drum belt (use 134163400)

This dryer drum belt is 88 3/4 inches long, and is 1/4 inch wide. The belt attaches to the motor pulley and helps rotate the drum as the motor rotates. If the drum does not rotate and you can still hear the motor running, the belt may have broken and will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:: EAP1148434

Availability:: In Stock

Price:: $20.29

Surface burner receptacle kit (sub 12001676)

The surface burner terminal block kit includes one plastic block, metal bracket, wires, and high-temperature nuts. This part is used to connect the wire harness to the surface burner element. If your element will not heat at all, or if it is not heating properly, it is likely an issue with the terminal block and it will need to be replaced. This part is a genuine OEM part. Please remember to disconnect the power supply before starting your repair.

Easy Part #:: EAP1570190

Availability:: In Stock

Price:: $15.98

Drain pump - 60hz 120v (drain pump and motor assembly)

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.

Easy Part #:: EAP2342445

Availability:: In Stock

Price:: $187.58

Crisper support - rear (shelf support stud)

This rear crisper cover support mounts to the inside of the cabinet wall to support the rear crisper cover. The support is held in place by a locking pin. If your shelf is not level or the drawer is not opening and closing properly, you may need to replace this part. This is a genuine OEM part and is sold individually.

Easy Part #:: EAP2358879

Availability:: In Stock

Price:: $14.60

Front drum bearing (top bearing)

The drum support bearing helps your dryer operate as quietly as possible by allowing the front of the drum to glide smoothly on the felt seal of the front panel when the drum is rotating. If your dryer is noisy or making a squeaking sound, the slides are probably worn and both slides will need to be replaced. This part measures 10” in height and 19 ½” inside width. Four drum glides are used with the drum support bearing and are sold separately. The support bearing is a genuine OEM part. Please remember to disconnect the power to the dryer before starting your repair.

Easy Part #:: EAP960316

Availability:: Special Order

Price:: $34.33

Surface element - 8 inch - 2600w (use 5303012223)

This surface burner element is eight inches in diameter. It has five turns, 2600 watts and looped terminal ends. The element provides heat to the cooking surface on your range. If your element is not heating, you may need to replace this part. Please make sure the power has been disconnected and the element is turned off and had time to cool before starting your repair. The element is a genuine OEM part. It is sold individually.